PS-IN202

Product Manual:
http://i.sears.com/s/d/pdf/mp-tc/12855/prod_5432596622


9600 @ 8-None-1


Demand mode, have to press the PRINT button on scale, so not for us that I can tell

GROSS        185.6 kg
TARE          50.6 kg
NET          135.0 kg



continuous mode spits out a new memsurememnt about every 0.5 seconds..:
     0.0 kgG
     0.0 kgG
     0.0 kgG
     0.0 kgG
     0.0 kgG

    44.2 kgG
    44.2 kgG
    58.0 kgGM
   117.2 kgGM
   133.0 kgGM
   136.2 kgGM
   140.4 kgGM
   141.4 kgGM
   141.6 kgG
   141.6 kgG
   141.6 kgG
   141.6 kgG
   142.2 kgGM
   139.8 kgGM
   126.4 kgGM
    99.6 kgGM
    56.6 kgGM
    44.2 kgGM
    44.2 kgGM
    44.2 kgG
    44.2 kgG
    44.2 kgG
    44.2 kgG
    44.2 kgG
    44.2 kgG
    44.2 kgG


with  Tare set.. and me stepping onto scale

     0.0 kgN T
     0.0 kgN T
     0.0 kgN T
     1.8 kgNMT
    84.6 kgNMT
    89.2 kgNMT
    94.6 kgNMT
    98.8 kgNMT
    96.2 kgNMT
    97.2 kgNMT
    97.0 kgNMT
    97.4 kgNMT
    98.8 kgNMT
    96.8 kgNMT
    97.4 kgNMT
    92.8 kgNMT
    81.2 kgNMT
    42.8 kgNMT
     1.2 kgNMT
     0.0 kgNMT
     0.0 kgNMT

The M is for movement, so the display should say 'stable' when no M is present
The T is for Tare, so maybe have a T or the word Tare show up.
G is for Gross weight, N is for Net, I don't thing these need anything

The above also has a extended ascii character 191 (upper right corner) that does not show up in notepad, but shows up in notepad++ as a 'STX'



Here is a videio showing the factory setup and use of their custom software..

Prime Scales Prime Interface Software Setup
https://www.youtube.com/watch?v=u_5gy7gXuYw

using the other serial ports and assigning to differrent GPIO pins https://www.youtube.com/watch?v=GwShqW39jlE

RS232 To TTL Converter Module Serial Module DB9 Connector 3.3V
uses a MAX3232
https://www.ebay.com/itm/153491168439